60W Remote Electric Transformer

Part #WEN2460RB2  |  Item #4705550  |  Manufacturer Part #EN-2460-RB2

Product Details

• Soft start, short and overload circuit protection features. For use with WAC Lighting low voltage under cabinet and recessed lighting systems. Transformers that end with -S include a lead wire for Line and Straight Edge under cabinet systems, and those that end with -T include a lead wire for InvisiLED 24V Tape Light systems.
• 1W Minimum load to support low load LED systems. Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current to be drawn.
• Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings.
• Input Voltage: 120V AC, Output Voltage: 24V AC, Loads vary based on Transformer 60Watt, 100Watt, 150Watt, and 300Watt.
• Smooth and continuous dimming with an electronic low voltage dimmer. Dimmers should always be installed on the primary side of the transformer.
• Standards: Class 2, UL & cUL Listed for Damp Locations.