DESCRIPTION

  • Reduce water hammer caused by quick valve closure
  • Water hammer arrestors are designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure, i.e. fast closing solenoid valves on water lines
  • The excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrestor
  • Maximum transient pressure surge, with arrestor properly sized and placed in the water supply system, will not rise above 150 psi following quick valve closure
  • Arrestors have static pressure rating of 150 psi, but for best performance static pressure should be not exceed 85 psi with a maximum flow velocity of 10' per second
  • Seamless copper tube body has a brass tailpiece with MNPT connection, acetal (NSF Listed) or brass piston, FDA approved Buna-N O-rings and lead free solder

Zurn Wilkins 1 in. MNPT Water Hammer Arrestor

W1250XLC

Manufacturer Part #: 1250XL-C

Fitting Sizes:

SPECIFICATIONS

ANSI Specifications
ANSI A112.26.1, ANSI B1.20.1
ASSE Standards
ASSE 1010
End Connection 2
MNPT
Fitting Size 2
1 in
Fitting Type
Straight
GSA Approved
No
IAPMO Listed
No
Maximum Pressure
150 psi
Maximum Temperature
180
NSF Certified
Yes
Weight
1.3
Width
2 in

Print