8 in. Hot Dipped Galvanized Malleable Iron Beam Clamp
Eaton B-Line Series
8 in. Hot Dipped Galvanized Malleable Iron Beam Clamp
Package Quantity Info:
Each: 1 Inner Pack: 1
Log in or Create Account
Log in or Create an Account to see product availability.
How to get it:
-
-
Shipping Not AvailableNot available at this time
Purchase history
Eaton B-Line Series
8 in. Hot Dipped Galvanized Malleable Iron Beam Clamp
B3034HDGD
Order #
Order Date
Job Name
My PO#
Shows all online and in-store purchases made within the past 12 months.
Product Details
Product Description
- C-clamps are recommended for hanging from steel beam where flange thickness does not exceed 3/4 in (19.0mm).
- May be used on top or bottom flange of the beam. Beveled lip allows hanging from top flange where clearance is limited. May be installed with the set screw in the up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. The rear window design permits inspection of thread engagement.
- Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering Approved (FM) for 3/8 in-16 and 1/2 in-13 rod sizes. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 & 23 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19 & 23.
- 3/8 in-16 is (cULus) Listed to support up to 4 in (100mm) pipe with the set screw in the down position, up to 3 in (75mm) pipe with the set screw in the up position. 1/2 in-13 is (cULus) Listed to support up to 8 in (200mm) pipe with the set screw in the down position, up to 6 in (150mm) pipe with the set screw in the up position.
Documents
Dimensions & Measurements
Fits Pipe Size
8 in
Height
1-13/16 in
Length
2-3/16 in
Rod Size (in)
1/2 in
Width
1-3/16 in
Characteristics & Features
Coating
Hot Dipped Galvanized
Material
Malleable Iron
Work Load Limit
810 lb
Warranty & Product Information
Application
Residential
FM Approved
Yes
UL Listed
Yes