3/4 in. Flare Brass Cap
3/4 in. Flare Brass Cap
Package Quantity Info:
Each: 1 Inner Pack: 1-
-
Shipping Not AvailableNot available at this time
All Sizes
Product Details
Product Details
- Brass Fittings/Access Valves/ Caps & Couplers
- For use with copper, brass, aluminum, steel, and plastic tube provided and acceptable flare could be generated with the material.
- Vacuum and pressures of 5,000 psi can be handled depending upon the size, material, and conditions. The valve core is typically the limiting restriction at 800 psi max. working pressure.
- Long nuts are recommended when vibration is a factor. Tubing should be double-flared in extreme applications to minimize flare thinning on over-tightening.
- Fittings listed generally comply with SAE, ASA, ASME, and MS standards; however, when design makes dimensions critical, please contact customer service for samples and/or prints for testing and evaluation.
- Pipe sizes listed are standard nominal pipe size and threads are to dry seal taper pipe standards.
- JB provides flare fitting to SAE Standard J513 whenever possible. Slight deviations can occur when full compliance fittings are .
- Most heavy-duty ACR tube fittings conform to SAE, ASA, and AHRI Standards for hydraulic, marine, and refrigeration service.
- Many tees and crosses are tapped to receive and access core in all 1/4" SAE flare ends.
- Made in the USA
Specifications
- Clean Bagged:
- No
- End Connection 1:
- Flare
- End Connections:
- Flare
- Fitting Size 1:
- 3/4 in
- Fitting Sizes:
- 3/4 in
- Fitting Type:
- Cap
- Material:
- Brass
- Origin:
- Domestic
- Proposition 65:
- WARNING: This product can expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- UPC:
- 684520700345